2pcs M3 Stud Thermistor for 3D Printer Hotend Easy Quick Disconnect I3 V6 QD

Description

Shop by Category
Hardware
CNC & 3D Printing
Automation & Linear Motion
Pneumatics
Embedded Development
Electronics
Camera Mounts
Tools
Other
Why Shop With Us
2pcs M3 Stud Thermistor for 3D Printer Hotend Easy Quick Disconnect I3 V6 QD
Product Description
*** 2 Pack ***
These are
M3 Threaded
thermistors with JST connectors (2.5mm spacing) attached.
ELIMINATES ONE OF THE MAIN HASSLES OF HOTEND MAINTENANCE
Standard thermistors that come with most printers are just a simple pair of wires ending in a thermistor. When you have to redo wiring to the hotend or replace a thermistor, it can be a real pain to deal with all the wires coming from the heater block.
Using disconnectable stud thermistors like these makes maintenance much easier - just unplug the connector and you've only got a few inches of wire coming out of the stud. You can then turn the heater block with a wrench without twisting and breaking wires.
This set includes
2x thermistors (
NTC 100k
)
w/ JST connectors attached
2x JST connectors (empty)
4x pins for the JST connectors
Installation is simple - you use a pair of wires (not provided, if you don't have wire, you can just cut the thermistor wires you are currently using) and crimp the provided pins onto them and insert into the empty JST connector. Thread the thermistor into the heat block on the hotend, and connect the JST connectors together.
Please be sure that you are comfortable performing this installation before purchasing. 3mm is the correct size for most heater blocks - but please be sure this is correct for yours before purchasing.
Please consider taking advantage of our multi-item discount found at the top of the listing page
; it allows us to combine shipping and pass on the savings to you.
10% off 3 items, 15% off 5+ (applies to most of our items)
FREE Shipping
to the USA + APO Addresses
© 2018 Albers LLC. All Rights Reserved.