8 Pieces FEP Film Sheet 140 x 200 mm High Transmittance Strength, 0.1 mm Thick

Description

8 Pieces FEP film sheet 140 x 200 mm high transmittance strength, 0.1 mm thickness compatible with UV DLP 3D printers, LCD SLA resin, with 2 pieces replacement plastic spatulas
Easy to install:
1. Remove the screws to detach the steel rings from the resin vat.
2. Remove the else screws to separate the steel ring and change the film.
3. Put the replaceable FEP film in between the steel rings and install the screws back, you may need to force these screws in and keep them tightly.
4. Install the steel rings back to the resin vat and ensure the FEP film is clean and tensioned properly.
Specifications:
Material: FEP film
Color: as pictures shown
Size: 140 x 200 mm/ 5.5 x 7.9 inch
Thickness: approx. 0.1 mm
Quantity: 10 pieces
Package include:
8 x FEP films
2 x Plastic spatulas
Notes:
Please allow a little error on the size due to manual measurement.
All the brands we mentioned above just show products compatibility, not worked as trade mark use, kindly noted. Our trademark is Outus.