APEM TW Proportional Output Self-Centering Thumbwheel, Black, w/Tab, 0.5-4.5V

Description

Parts for sale are new APEM TW hall effect thumbwheel rollers. Parts are in original manufacturer packaging along with mounting gasket and spring retainer. Thumbwheels are P/N HTW02BLK1687 (detailed specifications below).
This is a lot of parts that were custom ordered from APEM to have a connector applied on the ends of the wires (cut to
3 inch wire length
) but were not needed by the original purchaser.
The only customization of these parts is the wire lead length, otherwise they are the same as a standard HTW02BLK1 part
. These parts are 100% new, in original packaging so buy with confidence.
Component Details:
HTW02BLK1687
(
HTW
) TW-Series
(
0
) With tab
(
2
) 0.5-4.5V
(
BLK)
Black
(
1
) Standard spring tension
(
687
)
Custom wire length of 3 inches with stripped ends
General specifications:
The TW Series Thumbwheel is a self centering single axis device developed for thumb-actuated applications requiring proportional output. Utilizing non-contacting Hall effect technology for long life performance, the TW Series thumbwheel delivers up to 5 million thumb actuations.
KEY FEATURES:
5 million life cycles
Hall effect technology
Proportional control
Self-centering single-axis design
Choice of wheel colors: red, grey, black, or blue
EMI / RFI immunity
MECHANICAL (FOR X, Y AXIS)
• Break Out Force: 0.7N (0.15lbf)
• Mechanical Angle of Movement: 80º (±40º from center)
• Expected Life: 5 million cycles
• Lever Action (Centering): Spring centering
ENVIRONMENTAL
• Operating Temperature: -40ºC to +85ºC (-40ºF to +185ºF)
• Storage Temperature: -40ºC to +85ºC (-40ºF to +185ºF)
• Sealing: IP67*
• EMC Immunity Level: EN61000-4-3 (extended)
• EMC Emissions Level: EN61000-6-3:2001
• ESD: EN61000-4-2 (extended)
NOTES:
* Electronics sealed to IP67.
Exact specifications are subject to configuration.
All values are nominal.