BELTY: "Ender EZ Belt" Ender 3 3D Belt Printer Conversion Kit - FREE US SHIPPING

Description

Belty:
"Ender EZ Belt" Ender 3 Belt Printer Conversion Kit.
Use this kit to convert your Ender 3/Ender 3 Pro/Ender 3v2 into a 3D Belt Printer.
In September 2022 Adam Fasnacht released the Ender EZ Belt, Ender 3 belt printer conversion design as
featured on Printables
. This design is the simplest and most cost effective way to turn your old Ender 3, Ender 3 v2, or Ender 3 Pro into a belt printer with an infinite Z Axis. Skip the 0 Creality CR-30 and upgrade your existing printer to state of the art 3D printing tech.
Introduction and Description by Adam:
Benefits:
(different printer pictured)
Continuous Printing:
By removing the length limit on the Z axis you can queue up parts to print continuously since prints will automatically detach from the print belt as they round the front roller and can be collected in a box.
Large Format 3D Printing:
Belt printers enable you to print large format 3D objects up to 6'+ in length.
This conversion kit contains all the hardware needed for the Ender EZ Belt design
EXCEPT
for the belt itself by Adam on his
website
PowerBelt3D. This kit
DOES NOT
contain the base Ender 3 printer.
This design works with the standard MK8 nozzles that come with the Ender 3 or there are special extended belt printer nozzles offered by Adam through
PowerBelt3D.
While we aren't set up to handle returns at this time, if you receive a defective kit, reach out to us and we would be happy to make things right.
5 Steps to Your Own Ender Belt Printer:
1) Buy this
Belty:
"Ender EZ Belt" Ender 3 Belt Printer Conversion Kit
2) Buy the custom cut "Ender EZ Belt" printing belt from Adam on Adam's Website Powerbelt3D
3) (Optional) Acquire an Ender 3, Ender 3 v2, or Ender 3 Pro (there are some good deals on
Refurbished Ender 3 Printers
on eBay)
4) Print the 24 3D printed parts
available free through Printables
(QR Code in images)
5) Follow
Adam's instructions
to upgrade your Ender 3!
(QR Code in images)
Kit Contents:
1x 350mm Stainless Steel Rod
1x 240mm Stainless Steel Rod (Machined for this design)
4x 608ZZ Bearing
1x 200mm Closed Loop Belt
16x M5x10 Bolt
3x   M5x40 Bolt
10x M5 Slide-in T-Slot Nut
6x M5 Drop-in T-Slot Nut
4x M5x20 Bolt
2x M5x6 Heat-set Insert
2x M5 Lock Nut
4x M4x10 Flat Head Screw
4x M3x10 Bolt
4x Zip Ties
1x NEMA17 Motor Cable
1x 20T GT2 Timing Pulley
0 VALUE! Now only through Belty!
All credit for this design goes to Adam
Fasnacht.
Subscribe
to him on Youtube to show your support!