Layer Lock CR-10/S/Pro Build Surface Plate High Temp G10 Garolite 310 x 310mm

Description

G10 GAROLITE BUILD SURFACE
NYLON-BASED 3D PRINTING MADE EASY
G10 Garolite Build Surface is the reliable choice for consistently strong bed adhesion with nylon-based materials. By decreasing warping, succeeding with other advanced (and common) filaments just got a lot easier with this specially formulated surface.
Key Features of G10 Garolite:
Ideal for Printing Most Common Filaments (See Chart)
The only surface that works with Nylon-Based Filaments
Durable, Long-Lasting Surface
Decreases Warping
TAKE THE GUESS OUT OF ADVANCED MATERIALS SUCCESS
G10 Garolite Build Surface is designed to avoid warping issues that most common bed surfaces struggle with when facing Nylon's fickle adhesion properties.
Easily succeed with engineering-grade materials like Nylon
Save time, money, and resources thanks to reduced failures from warping
Learn how to succeed with nylon on Garolite via
this article
CONSISTENT DURABILITY AND RELIABILITY THAT LASTS
With proper care, hobbyists and professionals can expect the strong adhesion and lifespan of G10 Garolite Build Surface to last for thousands of prints thanks to its specially manufactured surface that's sturdier than most print build sheets on the market.
Engineered to last thanks to its linen-based, phenolic properties
Expect consistent, reliable strong print adhesion to the bed
EXPAND 3D PRINTING MATERIAL OPTIONS
G10 Garolite Build Surface significantly increases one's success with nylon-based filaments—while also still being compatible with standard filaments—making it a worthy go-to surface for makers to expand their filament printing options.
Print with advanced materials you may not have been ready to try before
Still print filament favorites like PLA and PETG
Enjoy the large variety of filaments you can print on Garolite alone
WHAT MATERIALS ARE COMPATIBLE WITH G10 GAROLITE BUILD SURFACE?
Compatible Material
Adhesion Promoter*
Dry Before Printing**
NylonX / K / G
✔
✔
Nylon (Generic)
✔
✔
PLA
✔
TPU / TPE
✔
PETG
✔
Ryno
✔
Wood fill Materials
Metal fill Materials
Taulman 910
✔
✔
Taulman T-Glase
PVA
✔
*Glue stick (PVA glue) or Hairspray will aid in adhesion to the build surface.
**
Some filaments absorb moisture more quickly than other filaments and need to be frequently put in a drying device to ensure they are moisture-free before printing for optimal results.
HOW DO YOU INSTALL AND MAINTAIN G10 GAROLITE BUILD SURFACE?
MAINTENANCE
Wipe the print surface before and after a print with isopropyl alcohol to maintain a clean surface.
Clean off PVA glue with water.
Be careful whenever using a sharp scraper to remove prints off the surface.
If the print surface becomes damaged from scratches or slight chipping, it is recommended that users lightly sand with 220 grit sandpaper and a sanding block. It is best to sand the entire plate evenly to avoid creating low spots. Avoid inhaling dust particles from sanding by wearing a respirator mask.
G10 GAROLITE BUILD SURFACE TECHNICAL SPECIFICATIONS
G10 Garolite Build Surface with adhesive backing
Operating Temperature: Up to 250°F (~121°C)
Size & Thickness Tolerance: +/- 0.015"