Pinion Gears 1 Mod Spur Gear 10T-35Tooth Bore 5-12mm Spur Transmission For Rack

Description

Product Description:
※ Model: 1.5 M spur gear
※ Number of teeth: 12T - 80T
※ Inner hole: 4/5/6/6.35/8/10/11/12/14/15/16/17mm
※ Surface: High-frequency quenching(Tooth)
※ Material: 45# steel
※※Note: D / (d1 * d2) indicates the keyway hole, such as 8mm (3x1.4mm); the one expressed as d1*d2 is the D hole, such as 5x4.5mm (D hole); otherwise, it is a through hole.
※ Purchase instructions: data such as the outer diameter of the rib, the total thickness, the top wire hole, etc., the data will be different depending on the batch, the actual product shall prevail! The other products shown in the picture are only for display purposes. If there is no special instructions, they need to be purchased separately. If you have any questions, please contact customer service.
※ Related links of supporting products:
Purchase Notes:
1. The gear material is 45 steel, and the inner holes are all with a positive tolerance of 0-+0.04. There may be a small amount of burrs in the spot, which is normal.
2. The gear surface has two kinds of blackening treatment and high-frequency quenching treatment, which is the hardness of 45 steel raw materials. Surface hardness is about 40-45 degrees
Package Include:
According to your Choose!