Raspberry Pi to Prusa i3 MK3 / MK3S / Zaribo cable - Custom made for you! [12”]

Description

Custom 12” cable to connect Raspberry Pi to Prusa i3 MK3 / MK3S via GPIO pins. This cable allows you to plug any raspberry pi directly into your Einsy Rambo board on your Prusa i3 MK3 / MK3S, Prusa Bear or Zaribo 220 / 320 / 420.
The Dupont connectors supplied (2x7 && 2x8) allow for simple plug-and-play between your rPi and your Prusa. Skip the confusing walkthroughs online and be done within 2 minutes from unpacking your custom cable.
What's included:
- 12” 6 conductor cable
- 1 x 16pin Dupont connector (female)
- 1 x 14pin Dupont connector (male)
See our other auctions for compatible Raspberry Pi cases, replacement parts and more for your Prusa i3 MK3 / MK3S!
NOTE:
This cable has only been stress tested with Raspberry Pi Zero, Zero W and 3 A+ models. If you plan on using a 3 B+ / 4, please refer to Einsy Rambo board manufacturer recommendations on power output to see if this will work for you. *
This cable requires Octoprint edits to enable communication via GPIO (vs USB).*