RF Active Probe 0.1 - 500 MHz with AD8307 detector

Description

DESCRIPTION
This is high input impedance probe intended to measure RF voltage
and conversion it to DC voltage. You need just this probe and DMM (Digital Multi Meter) and you can measure small RF voltage. Also you can use probe as RF sniffer, just replace input pin with  something like antenna for frequency you want to check. Also you can use this probe with NWT boxes and for many other useful things
This lot includes assembled and well tested RF probe with AD8307 detector PCB.  It suppose to be placed in some tube or enclosure. Even old marker pen will be ok.
Also you need solder DC supply and output wires to DMM (for example).
To get accurate results it is important that the ground probe contacts an RF ground close to the point on the circuit.
So to solder the wire somewhere on the RF probe ground surface and then connect it to the ground of tested device.
*** If you looking 50 Ohm AD8307 based probe please see this https://www.ebay.com/itm/334454151662
and this
https://www.ebay.com/itm/334454150892
***
TECHNICAL SPECIFICATION
Input impedance:  10 MOhm
Input capacitance:  0.5pf
Maximum RF input:  3v
Working
frequency: 0.1-500 MHz
Output: DC voltage
DC supply: +9-24v
PCB sizes:  55mm X 8.5mm
SHIPPING
We are open and active, regadless of the war. This is our way of supporting Ukraine's economy. Postal Service is fully operational where we are
.
We ship worldwide from Ukraine, by Registered Airmail with tracking number. After package leaves Ukraine you can track it through your local Postal web site. We ship next business day once the payment received. Delivery time depends on destination and your local customs clearance speed. It generally takes about 15-25 business days.