Schneider LC1D40AF7 TeSys D Magnetic Contactor 40A 110V AC

Description

Schneider TeSys D Contactor
Model Number: LC1D40AF7
3P(3NO) / AC-3 ≤ 440 V 40 A / 110 V AC coil
※Please specify what voltage you need when ordering.
Main
range
TeSys
product name
TeSys D
product or component type
Contactor
device short name
LC1D
contactor application
Motor control
Resistive load
utilisation category
AC-1
AC-3
AC-4
poles description
3P
pole contact composition
3 NO
[Ue] rated operational voltage
Power circuit: <= 300 V DC
Power circuit: <= 690 V AC 25...400 Hz
[Ie] rated operational current
40 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
60 A (at <60 °C) at <= 440 V AC AC-1 for power circuit
motor power kW
9 kW at 400 V AC 50/60 Hz (AC-4)
11 kW at 220...230 V AC 50/60 Hz (AC-3)
18.5 kW at 380...400 V AC 50/60 Hz (AC-3)
22 kW at 415...440 V AC 50/60 Hz (AC-3)
22 kW at 500 V AC 50/60 Hz (AC-3)
30 kW at 660...690 V AC 50/60 Hz (AC-3)
motor power HP (UL / CSA)
3 hp at 115 V AC 50/60 Hz for 1 phase motors
5 hp at 230/240 V AC 50/60 Hz for 1 phase motors
10 hp at 200/208 V AC 50/60 Hz for 3 phases motors
10 hp at 230/240 V AC 50/60 Hz for 3 phases motors
30 hp at 460/480 V AC 50/60 Hz for 3 phases motors
30 hp at 575/600 V AC 50/60 Hz for 3 phases motors
control circuit type
AC 50/60 Hz
control circuit voltage
110 V AC 50/60 Hz
auxiliary contact composition
1 NO + 1 NC
[Uimp] rated impulse withstand voltage
6 kV conforming to IEC 60947
overvoltage category
III
[Ith] conventional free air thermal current
10 A (at 60 °C) for signalling circuit
60 A (at 60 °C) for power circuit
Irms rated making capacity
140 A AC for signalling circuit conforming to IEC 60947-5-1
250 A DC for signalling circuit conforming to IEC 60947-5-1
800 A at 440 V for power circuit conforming to IEC 60947
rated breaking capacity
800 A at 440 V for power circuit conforming to IEC 60947
[Icw] rated short-time withstand current
100 A - 1 s for signalling circuit
120 A - 500 ms for signalling circuit
140 A - 100 ms for signalling circuit
72 A 40 °C - 10 min for power circuit
165 A 40 °C - 1 min for power circuit
320 A 40 °C - 10 s for power circuit
720 A 40 °C - 1 s for power circuit
associated fuse rating
80 A gG at <= 690 V coordination type 1 for power circuit
80 A gG at <= 690 V coordination type 2 for power circuit
10 A gG for signalling circuit conforming to IEC 60947-5-1
average impedance
1.5 mOhm - Ith 60 A 50 Hz for power circuit
[Ui] rated insulation voltage
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Power circuit: 690 V conforming to IEC 60947-4-1
Signalling circuit: 600 V CSA certified
Signalling circuit: 600 V UL certified
Signalling circuit: 690 V conforming to IEC 60947-1
electrical durability
1.4 Mcycles 60 A AC-1 at Ue <= 440 V
1.5 Mcycles 40 A AC-3 at Ue <= 440 V
power dissipation per pole
5.4 W AC-1
2.4 W AC-3
Front cover
With
mounting support
Rail
Plate
standards
CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508
product certifications
CCC
CSA
GOST
UL
connections - terminals
Control circuit: screw clamp terminals 1 cable(s) 1...4 mm² flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1...4 mm² flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1...4 mm² solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1...2.5 mm² flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1...4 mm² flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1...4 mm² solid without cable end
Power circuit: screw connectors 1 cable(s) 1…35 mm²flexible with cable end
Power circuit: screw connectors 1 cable(s) 1…35 mm²flexible without cable end
Power circuit: screw connectors 1 cable(s) 1…35 mm²solid without cable end
Power circuit: screw connectors 2 cable(s) 1…25 mm²flexible with cable end
Power circuit: screw connectors 2 cable(s) 1…25 mm²flexible without cable end
Power circuit: screw connectors 2 cable(s) 1…25 mm²solid without cable end
tightening torque
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Power circuit: 5 N.m - on EverLink BTR screw connectors - cable 1…25 mm² hexagonal screw head 4 mm
Power circuit: 8 N.m - on EverLink BTR screw connectors - cable 25…35 mm² hexagonal screw head 4 mm
operating time
12...26 ms closing
4...19 ms opening
safety reliability level
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1
mechanical durability
6 Mcycles
operating rate
3600 cyc/h at <= 140 °F (60 °C)
Complementary
coil technology
Without built-in suppressor module
control circuit voltage limits
0.3...0.6 Uc (-40…70 °C):drop-out AC 50/60 Hz
0.8...1.1 Uc (-40…60 °C):operational AC 50 Hz
0.85...1.1 Uc (-40…60 °C):operational AC 60 Hz
1...1.1 Uc (60…70 °C):operational AC 50/60 Hz
inrush power in VA
140 VA at 68 °F (20 °C) (cos ϕ 0.75) 60 Hz
160 VA at 68 °F (20 °C) (cos ϕ 0.75) 50 Hz
hold-in power consumption in VA
13 VA at 68 °F (20 °C) (cos ϕ 0.3) 60 Hz
15 VA at 68 °F (20 °C) (cos ϕ 0.3) 50 Hz
heat dissipation
4...5 W at 50/60 Hz
auxiliary contacts type
Type mechanically linked (1 NO + 1 NC) conforming to IEC 60947-5-1
Type mirror contact (1 NC) conforming to IEC 60947-4-1
signalling circuit frequency
25...400 Hz
minimum switching current
5 mA signalling circuit
minimum switching voltage
17 V signalling circuit
non-overlap time
1.5 ms on de-energisation (between NC and NO contact)
1.5 ms on energisation (between NC and NO contact)
insulation resistance
> 10 MOhm signalling circuit
power range
7…11 kW at 200…240 V 3 phases
15…25 kW at 380…440 V 3 phases
15…25 kW at 480…500 V 3 phases
motor starter type
Direct on-line contactor
contactor coil voltage
110 V AC
Environment
IP degree of protection
IP20 front face conforming to IEC 60529
protective treatment
TH conforming to IEC 60068-2-30
pollution degree
3
ambient air temperature for operation
-40...60 °C
ambient air temperature for storage
-60...80 °C
fire resistance
1562 °F (850 °C) conforming to IEC 60695-2-1
flame retardance
V1 conforming to UL 94
mechanical robustness
Vibrations contactor open 2 Gn, 5...300 Hz
Shocks contactor open 10 Gn for 11 ms
Vibrations contactor closed 4 Gn, 5...300 Hz
Shocks contactor closed 15 Gn for 11 ms
height
122 mm
width
555 mm
depth
120 mm
product weight
0.85 kg
You can pick up from Fullerton, California or Piscataway, New Jersey or we will ship via UPS Ground.
Contact us for exact shipping cost.
Fullerton Office
2320 E Valencia Dr
Fullerton, CA 92831
Piscataway Office
244 N. Randolphville Road
Piscataway, NJ 08854
Payment
Supra Machine Tool accepts: PayPal, Visa, Master Card, American Express, Money Orders, Cashier Checks, Wire Transfer as payment of goods purchased in our store. (Please send payment to
2320 E Valencia Dr Fullerton, CA 92831
) All payments must be received within 7 business days. All buyers residing in California add 8.75% sales tax.
Shipping and Handling
Buyer pays the Shipping charge based on USPS Priority Mail or UPS Ground Shipping Charges. Orders being shipped to P.O. Boxes will be delivered by United States Postal Services (USPS). Note: Weight restrictions may apply in some cases. Orders under 150 lbs. can be shipped by U.P.S., freight prepaid or collect. Orders above 150 lbs. will be shipped by freight carrier. Supra Machine Tool offers a group of carriers that can quote you with an estimate of shipping charges for all items. Estimated delivery time by UPS is from 2 to 6 business days from the time the order is processed. International buyer pays the actual shipping charge + .50-.50 handling fees. International shipments of 150 lbs or more can be made by UPS International. Buyers are responsible for payment of all Shipping and Handling charges on all items.
Terms and Conditions
We guarantee the items are exactly as said in description. If you do not pay for them in the specified amount of time we have to file a non-paying complaint with eBay. Thank you for viewing. Supra Machine Tool appreciates your business very much.
Please contact us if you have any questions.
Visit our
Supra Machine Tool E-bay Store
for a wide selection of parts for milling machine, machining center, surface grinder, and engine lathes.